Epoxy Pool Paint vs Other Finishes: Which One Is the Best?
Is it time for a new lining for a swimming pool that has become a bit faded, cracked, and flaked away after years of sun and chlorine exposure? A new coat won’t just make your swim space look brand new; it will also make the pool easier to keep clean and will reinforce its protective layer so it stays leak-free for longer.
There is no doubt that a new coat will be a smart choice. You might, however, have a few doubts when it comes to the finish type. Pool Painters in Sydney can refresh your pool with all sorts of paints, surface coatings, or finishes. Here is a quick look at some of the most popular finishes or coatings that you can consider when it is time for a pool makeover or upgrade.
Epoxy Pool Paint
Epoxy swimming pool coatings are ideal if you are looking for a budget-friendly repair or upgrade. The coating is created by mixing together a resin and a hardener and should be allowed to “cure” to form a proper bond with the pool walls and floors.
This type of paint is specially designed to seal and protect surfaces that are submerged under water. The coating can be applied to brand new pools or used as a resurfacing layer for older pools. It is a great option for both fibreglass and concrete pool types.
Advantages
Usually outlasts acrylic or rubber-based pool coatings (Over 14 years).
The surface looks attractive.
The paint is available in many colours.
The smooth surface is non-porous and algae-resistant, which eases cleaning.
It strongly resists chemicals and water.
The treatment is affordable.
Disadvantages
The surface preparation can take a while.
The paint does take 7 days to properly cure.
It can be a bit slippery.
Glass PebblePool Finishes
Pebblecrete pools are currently trending here in Sydney. This pool coating looks very modern because it is made from a mixture of cement and glass pebbles. It is the most durable pool finish you can get and a must if you want a high-end and more unique pool look.
Advantages
Long lifespan of over 20 years.
Crack-resistant and won’t fade.
Slip-resistant.
Visually stunning.
Disadvantages
Higher installation expense.
Installation is quite complex.
Tile Pool Finishes
If you want a more creative look for your pool, then you can also consider tiling the interior pool surface. Tiles can be installed all the way through from the pool surrounds, over the walls, to the bottom floor. The sky is the limit when it comes to tile designs, and this surface type does tend to last a very long time.
Advantages
Can last over 20 years.
Offers a luxurious and very interesting appearance.
Easy to clean and stain-resistant.
Disadvantages
Expensive installation.
Labour-intensive.
Long installation and drying time.
Repairs can cost a lot.
Find the Right Coating for Your Pool Today
You don’t have to keep staring at the dull pool or struggle to keep the faded and flaky surface clean. At Pool Painters, we can restore and fully resurface or repaint any type of pool. We specialise in epoxy pool painting but also provide other surfacing solutions like tiling or glass pebblecreting.
Contact Pool Painters to learn more about our pool resurfacing services in Sydney or to book our team so we can help revive and restore your beloved swimming area.